Inch cam follower(inch stud type track roller), crowned OD, screwdriver slot, unsealed, CCF-1 1/2, CRC-24, CS-48
D | 38.1 mm | Outside diameter |
d | 15.875 mm | Stud diameter |
B | 61.1 mm | Overall width |
C | 22.225 mm | Outer ring width |
B1 | 38.1 mm | Length shank on stud |
B2 | 9.525 mm | Distance lubrication hole to flange ring |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 27.78 mm | Outside diameter flange ring |
G | 5/8-18 | Thread stud |
G1 | 19.05 mm | Thread length |
M | 4.7625 mm | Seat diameter for lubrication accessories |
M1 | 2.3825 mm | Diameter of lubrication hole (shank) |
SW | 7.937 mm | Width across flats |
r min | 1.59 mm | Chamfer dimension outer ring |
Fr | 21528 kN | Maximum dynamic radial load |
F0r | 25087 kN | Maximum static radial load |
nD G | 2500 r/min | Limiting speed |
≈m | 0.23 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Gap type | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
3/16” Alemite Fitting | Grease fitting | |
73.45 Nm | Recommended tightening torque |
-30ºC to + 120ºC | Temperature range °C | |
-22ºF to + 250ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | IKO | NTN | SMITH | Carter |
CCF-1 1/2 | CRC-24 | CS-48 | CF-24-Y | CR 24 VR | CRV24/3AS | CR-1 1/2-C | CCNB-48 |