Inch cam follower(inch stud type track roller), crowned OD, hexagon socket. sealed, CCF-10-SB
| D | 254 mm | Outside diameter |
| d | 107.95 mm | Stud diameter |
| B | 388.9 mm | Overall width |
| C | 133.35 mm | Outer ring width |
| B1 | 254 mm | Length shank on stud |
| B2 | 31.75 mm | Distance lubrication hole to flange ring |
| C1 | 3.175 mm | Distance face outer ring to face thrust washer |
| d1 | 138.91 mm | Outside diameter flange ring |
| G | 3 1/2-4 | Thread stud |
| G1 | 120.65 mm | Thread length |
| M | 14 mm | Seat diameter for lubrication accessories |
| M1 | 4.7625 mm | Diameter of lubrication hole (shank) |
| SW | 31.75 mm | Width across flats |
| r min | 7.14 mm | Chamfer dimension outer ring |
| Fr | 585112 kN | Maximum dynamic radial load |
| F0r | 958833 kN | Maximum static radial load |
| nD G | 275 r/min | Limiting speed |
| ≈m | 67.22 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric | Stud type | |
| Gap type | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Hex | Mouting hole | |
| 1/4” N.P.T. fitting | Grease fitting | |
| 565 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL |
| CCF-10-SB |
