Inch cam follower(inch stud type track roller), crowned OD, screwdriver slot, sealed, CCF-2 1/2-S, CRSC-40, CS-80-L
| D | 63.5 mm | Outside diameter |
| d | 25.4 mm | Stud diameter |
| B | 96 mm | Overall width |
| C | 38.1 mm | Outer ring width |
| B1 | 57.15 mm | Length shank on stud |
| B2 | 14.2875 mm | Distance lubrication hole to flange ring |
| C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
| d1 | 42.86 mm | Outside diameter flange ring |
| G | 1-14 | Thread stud |
| G1 | 28.575 mm | Thread length |
| M | 4.7625 mm | Seat diameter for lubrication accessories |
| M1 | 3.175 mm | Diameter of lubrication hole (shank) |
| SW | 12.7 mm | Width across flats |
| r min | 2.38 mm | Chamfer dimension outer ring |
| Fr | 52131 kN | Maximum dynamic radial load |
| F0r | 73170 kN | Maximum static radial load |
| nD G | 1100 r/min | Limiting speed |
| ≈m | 1.13 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| 3/16” Alemite Fitting | Grease fitting | |
| 254.25 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | NTN | SMITH | Carter |
| CCF-2 1/2-S | CRSC-40 | CS-80-L | CF-40-PPY | CRV40LL/3AS | CR-2 1/2-XC | CCNB-80-S |
