Inch cam follower(inch stud type track roller), crowned OD, screwdriver slot, sealed, CCF-2-S, CRSC-32, CS-64-L
D | 50.8 mm | Outside diameter |
d | 22.225 mm | Stud diameter |
B | 83.3 mm | Overall width |
C | 31.75 mm | Outer ring width |
B1 | 50.8 mm | Length shank on stud |
B2 | 12.7 mm | Distance lubrication hole to flange ring |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 35.72 mm | Outside diameter flange ring |
G | 7/8-14 | Thread stud |
G1 | 25.4 mm | Thread length |
M | 4.7625 mm | Seat diameter for lubrication accessories |
M1 | 3.175 mm | Diameter of lubrication hole (shank) |
SW | 11.1125 mm | Width across flats |
r min | 2.38 mm | Chamfer dimension outer ring |
Fr | 35984 kN | Maximum dynamic radial load |
F0r | 47015 kN | Maximum static radial load |
nD G | 1400 r/min | Limiting speed |
≈m | 0.62 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Axial plain washer | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
3/16” Alemite Fitting | Grease fitting | |
169.5 Nm | Recommended tightening torque |
-30ºC to + 80ºC | Temperature range °C | |
-22ºF to + 176ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | IKO | NTN | SMITH | Carter |
CCF-2-S | CRSC-32 | CS-64-L | CF-32-PPY | CR 32 VUUR | CRV32LL/3AS | CR-2-XC | CCNB-64-S |