Inch cam follower(inch stud type track roller), crowned OD, screwdriver slot, sealed, CCF-3 1/4-S, CRSC-52, CS-104-L
D | 82.55 mm | Outside diameter |
d | 31.75 mm | Stud diameter |
B | 108.7 mm | Overall width |
C | 44.45 mm | Outer ring width |
B1 | 63.5 mm | Length shank on stud |
B2 | 15.875 mm | Distance lubrication hole to flange ring |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 53.98 mm | Outside diameter flange ring |
G | 1 1/4-12 | Thread stud |
G1 | 31.75 mm | Thread length |
M | 6.35 mm | Seat diameter for lubrication accessories |
M1 | 3.175 mm | Diameter of lubrication hole (shank) |
SW | 19.05 mm | Width across flats |
r min | 3.18 mm | Chamfer dimension outer ring |
Fr | 69923 kN | Maximum dynamic radial load |
F0r | 110800 kN | Maximum static radial load |
nD G | 880 r/min | Limiting speed |
≈m | 2.18 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Axial plain washer | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
1/4” Alemite Fitting | Grease fitting | |
389.85 Nm | Recommended tightening torque |
-30ºC to + 80ºC | Temperature range °C | |
-22ºF to + 176ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | NTN | SMITH | Carter |
CCF-3 1/4-S | CRSC-52 | CS-104-L | CF-52-PPY | CRV52LL/3AS | CR-3 1/4-XC | CCNB-104-S |