Inch cam follower(inch stud type track roller), crowned OD, hexagon socket. sealed, CCF-5-SB, CRSBC-80, CS-160-LW
| D | 127 mm | Outside diameter |
| d | 50.8 mm | Stud diameter |
| B | 200 mm | Overall width |
| C | 69.85 mm | Outer ring width |
| B1 | 128.5875 mm | Length shank on stud |
| B2 | 22.225 mm | Distance lubrication hole to flange ring |
| C1 | 1.57 mm | Distance face outer ring to face thrust washer |
| d1 | 90.49 mm | Outside diameter flange ring |
| G | 2-12 | Thread stud |
| G1 | 65.0875 mm | Thread length |
| M | 14 mm | Seat diameter for lubrication accessories |
| M1 | 4.7625 mm | Diameter of lubrication hole (shank) |
| SW | 22.225 mm | Width across flats |
| r min | 3.18 mm | Chamfer dimension outer ring |
| Fr | 207166 kN | Maximum dynamic radial load |
| F0r | 302242 kN | Maximum static radial load |
| nD G | 575 r/min | Limiting speed |
| ≈m | 8.89 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric | Stud type | |
| Gap type | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Hex | Mouting hole | |
| 1/4” N.P.T. fitting | Grease fitting | |
| 565 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | NTN | SMITH | Carter |
| CCF-5-SB | CRSBC-80 | CS-160-LW | CRV80LLH/3AS | CR-5-XBC | CCNB-160-SB |
