Inch cam follower(inch stud type track roller), crowned OD, screwdriver slot, unsealed, CCF-7/8, CRC-14, CS-28
D | 22.225 mm | Outside diameter |
d | 9.525 mm | Stud diameter |
B | 35.7 mm | Overall width |
C | 12.7 mm | Outer ring width |
B1 | 22.225 mm | Length shank on stud |
B2 | 6.35 mm | Distance lubrication hole to flange ring |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 15.48 mm | Outside diameter flange ring |
G | 3/8-24 | Thread stud |
G1 | 9.525 mm | Thread length |
M | 4.7625 mm | Seat diameter for lubrication accessories |
M1 | 2.3825 mm | Diameter of lubrication hole (shank) |
SW | 4.7625 mm | Width across flats |
r min | 0.4 mm | Chamfer dimension outer ring |
Fr | 7384 kN | Maximum dynamic radial load |
F0r | 9185 kN | Maximum static radial load |
nD G | 5400 r/min | Limiting speed |
≈m | 0.047 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Gap type | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
3/16” Alemite Fitting | Grease fitting | |
28.25 Nm | Recommended tightening torque |
-30ºC to + 120ºC | Temperature range °C | |
-22ºF to + 250ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | IKO | NTN | SMITH | Carter |
CCF-7/8 | CRC-14 | CS-28 | CF-14-Y | CR 14 VR | CRV14/3AS | CR-7/8-C | CCNB-28 |