Inch cam follower(inch stud type track roller), eccentric, crowned OD, hexagon socket, sealed, CCFE-9/16-SB, CS-18-LWX
D | 14.2875 mm | Outside diameter |
d | 4.826 mm | Stud diameter |
B | 26.2 mm | Overall width |
C | 9.525 mm | Outer ring width |
B1 | 15.875 mm | Length shank on stud |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 10.41 mm | Outside diameter flange ring |
G | 10-32 | Thread stud |
G1 | 6.35 mm | Thread length |
M | 3.175 mm | Seat diameter for lubrication accessories |
SW | 3.175 mm | Width across flats |
de | 6.35 mm | Eccentric collar outside diameter |
B1 | 9.525 mm | Eccentric collar width |
e | 0.254 mm | Eccentricity |
r min | 0.4 mm | Chamfer dimension outer ring |
Fr | 3025 kN | Maximum dynamic radial load |
F0r | 3514 kN | Maximum static radial load |
nD G | 10000 r/min | Limiting speed |
≈m | 0.02 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric stud with eccentric collar | Stud type | |
Axial plain washer | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Hex | Mouting hole | |
1/8” Alemite Fitting | Grease fitting | |
3.955 Nm | Recommended tightening torque |
-30ºC to + 80ºC | Temperature range °C | |
-22ºF to + 176ºF | Temperature range °F |
Mc.GILL | RBC | SMITH | Carter |
CCFE-9/16-SB | CS-18-LWX | CR-9/16-XBEC | CCNBE-18-SB |