Inch cam follower(inch stud type track roller), heavy stud, crowned OD, screwdriver slot, sealed, CCFH-1 1/2-S, CRHSC-24, CH-48-L
| D | 38.1 mm | Outside diameter |
| d | 22.225 mm | Stud diameter |
| B | 61.1 mm | Overall width |
| C | 22.225 mm | Outer ring width |
| B1 | 38.1 mm | Length shank on stud |
| B2 | 9.525 mm | Distance lubrication hole to flange ring |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 27.78 mm | Outside diameter flange ring |
| G | 7/8-14 | Thread stud |
| G1 | 19.05 mm | Thread length |
| M | 4.7625 mm | Seat diameter for lubrication accessories |
| M1 | 2.3825 mm | Diameter of lubrication hole (shank) |
| SW | 7.937 mm | Width across flats |
| Fr | 21528 kN | Maximum dynamic radial load |
| F0r | 50173 kN | Maximum static radial load |
| nD G | 2500 r/min | Limiting speed |
| ≈m | 0.31 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Heavy duty,Centric | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| 3/16” Alemite Fitting | Grease fitting | |
| 73.45 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | IKO | SMITH | Carter |
| CCFH-1 1/2-S | CRHSC-24 | CH-48-L | CRH 24 VUU | HR-1 1/2-XC | CCNBH-48-S |
