Inch cam follower(inch stud type track roller), heavy stud, crowned OD, screwdriver slot, unsealed, CCFH-1, CRHC-16, CH-32
| D | 25.4 mm | Outside diameter |
| d | 15.875 mm | Stud diameter |
| B | 42.1 mm | Overall width |
| C | 15.875 mm | Outer ring width |
| B1 | 25.4 mm | Length shank on stud |
| B2 | 6.35 mm | Distance lubrication hole to flange ring |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 19.84 mm | Outside diameter flange ring |
| G | 5/8-18 | Thread stud |
| G1 | 12.7 mm | Thread length |
| M | 4.7625 mm | Seat diameter for lubrication accessories |
| M1 | 2.3825 mm | Diameter of lubrication hole (shank) |
| SW | 6.35 mm | Width across flats |
| Fr | 9897 kN | Maximum dynamic radial load |
| F0r | 27222 kN | Maximum static radial load |
| nD G | 4800 r/min | Limiting speed |
| ≈m | 0.08 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Heavy duty,Centric | Stud type | |
| Gap type | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| 3/16” Alemite Fitting | Grease fitting | |
| 28.25 Nm | Recommended tightening torque |
| -30ºC to + 120ºC | Temperature range °C | |
| -22ºF to + 250ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | IKO | SMITH | Carter |
| CCFH-1 | CRHC-16 | CH-32 | CRH 16 VR | HR-1-C | CCNBH-32 |
