Inch cam follower(inch stud type track roller), heavy stud, crowned OD, screwdriver slot, sealed, CCFH-2 1/4-S, CRHSC-36, CH-72-L
D | 57.15 mm | Outside diameter |
d | 28.575 mm | Stud diameter |
B | 83.3 mm | Overall width |
C | 31.75 mm | Outer ring width |
B1 | 50.8 mm | Length shank on stud |
B2 | 12.7 mm | Distance lubrication hole to flange ring |
C1 | 0.8 mm | Distance face outer ring to face thrust washer |
d1 | 35.72 mm | Outside diameter flange ring |
G | 1 1/8-12 | Thread stud |
G1 | 25.4 mm | Thread length |
M | 4.7625 mm | Seat diameter for lubrication accessories |
M1 | 3.175 mm | Diameter of lubrication hole (shank) |
SW | 11.1125 mm | Width across flats |
Fr | 35984 kN | Maximum dynamic radial load |
F0r | 94031 kN | Maximum static radial load |
nD G | 1300 r/min | Limiting speed |
≈m | 0.85 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Heavy duty,Centric | Stud type | |
Axial plain washer | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
3/16” Alemite Fitting | Grease fitting | |
610 Nm | Recommended tightening torque |
-30ºC to + 80ºC | Temperature range °C | |
-22ºF to + 176ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | RBC | IKO | SMITH | Carter |
CCFH-2 1/4-S | CRHSC-36 | CH-72-L | CRH 36 VUU | HR-2 1/4-XC | CCNBH-72-S |