Inch cam follower(inch stud type track roller), eccentric, cylindrical OD, screwdriver slot, unsealed, CFE-1 1/8, CRE-18, S-36-X
D | 28.575 mm | Outside diameter |
d | 11.1125 mm | Stud diameter |
B | 42.1 mm | Overall width |
C | 15.875 mm | Outer ring width |
B1 | 25.4 mm | Length shank on stud |
B2 | 6.35 mm | Distance lubrication hole to flange ring |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 19.84 mm | Outside diameter flange ring |
G | 7/16-20 | Thread stud |
G1 | 12.7 mm | Thread length |
M | 4.7625 mm | Seat diameter for lubrication accessories |
M1 | 2.3825 mm | Diameter of lubrication hole (shank) |
SW | 6.35 mm | Width across flats |
de | 15.875 mm | Eccentric collar outside diameter |
B1 | 12.7 mm | Eccentric collar width |
e | 0.762 mm | Eccentricity |
r min | 0.79 mm | Chamfer dimension outer ring |
Fr | 9897 kN | Maximum dynamic radial load |
F0r | 13611 kN | Maximum static radial load |
nD G | 3400 r/min | Limiting speed |
≈m | 0.085 kg | Weight |
Cylindrical | Outer ring profile | |
Full complement roller | Roller guide | |
Centric stud with eccentric collar | Stud type | |
Gap type | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
3/16” Alemite Fitting | Grease fitting | |
39.55 Nm | Recommended tightening torque |
-30ºC to + 120ºC | Temperature range °C | |
-22ºF to + 250ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | SMITH | Carter |
CFE-1 1/8 | CRE-18 | S-36-X | CFE-18 | CR-1 1/8-E | CNBE-36 |