Inch cam follower(inch stud type track roller), eccentric, cylindrical OD, screwdriver slot, unsealed, CFE-3 1/2, CRE-56, S-112-X
| D | 88.9 mm | Outside diameter |
| d | 34.925 mm | Stud diameter |
| B | 121.4 mm | Overall width |
| C | 50.8 mm | Outer ring width |
| B1 | 69.85 mm | Length shank on stud |
| B2 | 17.4625 mm | Distance lubrication hole to flange ring |
| C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
| d1 | 61.91 mm | Outside diameter flange ring |
| G | 1 3/8-12 | Thread stud |
| G1 | 34.925 mm | Thread length |
| M | 6.35 mm | Seat diameter for lubrication accessories |
| M1 | 3.175 mm | Diameter of lubrication hole (shank) |
| SW | 19.05 mm | Width across flats |
| de | 46.02 mm | Eccentric collar outside diameter |
| B1 | 34.925 mm | Eccentric collar width |
| e | 1.524 mm | Eccentricity |
| r min | 3.18 mm | Chamfer dimension outer ring |
| Fr | 101414 kN | Maximum dynamic radial load |
| F0r | 140668 kN | Maximum static radial load |
| nD G | 820 r/min | Limiting speed |
| ≈m | 2.91 kg | Weight |
| Cylindrical | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric stud with eccentric collar | Stud type | |
| Gap type | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| 1/4” Alemite Fitting | Grease fitting | |
| 474.6 Nm | Recommended tightening torque |
| -30ºC to + 120ºC | Temperature range °C | |
| -22ºF to + 250ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | SMITH | Carter |
| CFE-3 1/2 | CRE-56 | S-112-X | CFE-56 | CR-3 1/2-E | CNBE-112 |
