Inch cam follower(inch stud type track roller), narrow roller width, eccentric, cylindrical OD, screwdriver slot, unsealed, CFE-5/8-N, CRE-10
D | 15.875 mm | Outside diameter |
d | 6.35 mm | Stud diameter |
B | 27 mm | Overall width |
C | 10.3124 mm | Outer ring width |
B1 | 15.875 mm | Length shank on stud |
C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
d1 | 11.73 mm | Outside diameter flange ring |
G | 1/4-28 | Thread stud |
G1 | 7.9375 mm | Thread length |
M | 3.175 mm | Seat diameter for lubrication accessories |
SW | 3.175 mm | Width across flats |
de | 9.525 mm | Eccentric collar outside diameter |
B1 | 11.1125 mm | Eccentric collar width |
e | 0.381 mm | Eccentricity |
r min | 0.4 mm | Chamfer dimension outer ring |
Fr | 4137 kN | Maximum dynamic radial load |
F0r | 4826 kN | Maximum static radial load |
nD G | 9200 r/min | Limiting speed |
≈m | 0.019 kg | Weight |
Cylindrical | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Gap type | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
Lithium Soap Grease NLGI #2 | Grease |
Hex | Mouting hole | |
1/8” Alemite Fitting | Grease fitting | |
3.955 Nm | Recommended tightening torque |
-30ºC to + 120ºC | Temperature range °C | |
-22ºF to + 250ºF | Temperature range °F |
Mc.GILL | Torrington・Koyo・NSK | SMITH |
CFE-5/8-N | CRE-10 | CR-5/8-A-E |