Bearing tolerances and clearances
- Tolerances: Normal, P6, P5
- Internal clearance: Single row track rollers, Double row track rollers
precision track roller CPA35-2RS, concentric, roller C35 and MAT35 pivot assembly, seals on both side
| Eccentric | Adjustability | |
| Prismatic | Profile of running surface |
| D | 28.2 mm | Roller diameter |
| C | 7.5 mm | Roller width |
| B | 14.95 mm | Overall width |
| B1 | 2.55 mm | Width mounting surface to outer ring end face |
| B2 | 4.2 mm | Mounting pin width |
| B3 | 0.7 mm | Material protrusion |
| d1 | 14.8 mm | Shoulder diameter inner ring |
| d2 | 12 mm | Mounting pin diameter h7 |
| g | M5 | Thread size |
| lg | 9 mm | Thread length |
| S | 15 mm | Width across flat |
| e | 0.7 mm | Eccentricity |
| Cr | 4020 N | Dynamic load rating |
| C0r | 1755 N | Load capacity radial |
| C0a | 700 N | Load capacity axial |
| ≈m | 32 g | Weight |
| 52100 | 100Cr6 | GCr15 | Ring and ball material | |
| Steel | Retainer material | |
| Seals | Sealing solution | |
| Kyodo Yushi Multemp PS2 | Grease | |
| -20°C to +120°C | Temperature range °C | |
| -4°F to +248°F | Temperature range °F | |
| 1045 | 1.1191 | Mouting pivot material |
| P6 (ABEC-3) | Tolerance | |
| P5 (ABEC-5) | Radial run-out | |
| 0.006~0.012 | Radial clearance |
| 35 | For rail size | |
| T and U | For rail type | |
| TLV35 |TLC35 | ULV35 | ULC35 | For rails | |
| NSW35 | NSD35 | CS35 | CD35 | For sliders |
| Rollon | AUTOMOTION | ELESA+GANTER |
| CPA35-2RS | L1935.CPA35-2RS | GN 2426-35-E-2RS |
Bearing tolerances and clearances
