Bearing tolerances and clearances
- Tolerances: Normal, P6, P5
- Internal clearance: Single row track rollers, Double row track rollers
precision track roller CPN35-2Z, concentric, roller C35 and MNT35 pivot assembly, shields on both side
Concentric | Adjustability | |
Prismatic | Profile of running surface |
D | 28.2 mm | Roller diameter |
C | 7.5 mm | Roller width |
B | 14.95 mm | Overall width |
B1 | 2.55 mm | Width mounting surface to outer ring end face |
B2 | 4.2 mm | Mounting pin width |
B3 | 0.7 mm | Material protrusion |
d1 | 14.8 mm | Shoulder diameter inner ring |
d2 | 12 mm | Mounting pin diameter h7 |
g | M5 | Thread size |
lg | 9 mm | Thread length |
S | 15 mm | Width across flat |
Cr | 4020 N | Dynamic load rating |
C0r | 1755 N | Load capacity radial |
C0a | 700 N | Load capacity axial |
≈m | 32 g | Weight |
52100 | 100Cr6 | GCr15 | Ring and ball material | |
Steel | Retainer material | |
Shields | Sealing solution | |
Kyodo Yushi Multemp PS2 | Grease | |
-50°C to +120°C | Temperature range °C | |
-58°F to +248°F | Temperature range °F | |
1045 | 1.1191 | Mouting pivot material |
P6 (ABEC-3) | Tolerance | |
P5 (ABEC-5) | Radial run-out | |
0.006~0.012 | Radial clearance |
35 | For rail size | |
T and U | For rail type | |
TLV35 |TLC35 | ULV35 | ULC35 | For rails | |
NSW35 | NSD35 | CS35 | CD35 | For sliders |
Rollon | AUTOMOTION | ELESA+GANTER |
CPN35-2Z CPN35 | L1935.CPN35-2Z | GN 2426-35-N-2Z |
Bearing tolerances and clearances