Roller LEN28/PEN30/CPA30Z-55 for ML28/LAN30/TEP30 rails, eccentric, shielded, P6 dimension tolerance, P5 run-out
| L. Rollers for ML rails | Roller name | |
| Eccentric | Adjustability | |
| Prismatic | Profile of running surface |
| D | 23.15 mm | Roller diameter |
| C | 7 mm | Roller width |
| B | 10.2 mm | Overall width |
| B1 | 2.5 mm | Width mounting surface to outer ring end face |
| B3 | 0.7 mm | Material protrusion |
| d1 | 12 mm | Shoulder diameter inner ring |
| g | M5 | Thread size |
| Cr | 680 N | Dynamic load rating |
| C0r | 600 N | Load capacity radial |
| C0a | 250 N | Load capacity axial |
| ≈m | 20 g | Weight |
| 52100 | 100Cr6 | GCr15 | Ring and ball material | |
| Steel | Retainer material | |
| Shields | Sealing solution | |
| SINOPEC 7014 | Grease | |
| -30°C to +170°C | Temperature range °C | |
| -22°F to +338°F | Temperature range °F |
| P6 (ABEC-3) | Tolerance | |
| P5 (ABEC-5) | Radial run-out | |
| 0.006~0.012 | Radial clearance |
| 28 | For rail size | |
| ML28 | LAN30 | TEP30 | For rails | |
| CEN30-3 | CEN30-3T | CEN30-5 | CEN30-5T | RL28 | RLS28 | For sliders |
| DIN 912 8.8 | Screw standard | |
| M5 | Screw size | |
| NM | 7 Nm | Torgue (NM) |
| Flat key KLM28 | Flat Key (+0.15/-0mm) |
| Rollon | T-Race |
| PEN30 CPA30Z-55 | LEN28 |
