Bearing tolerances and clearances
- Tolerances: Normal, P6, P5
- Internal clearance: Single row track rollers, Double row track rollers
Precision floating roller RCP18G for high performance guide MRG18/TMGC18/TMGV18, V profiled OD, concentric, two seals on both side
| Concentric | Adjustability | |
| floating | Roller version |
| D | 13.2 mm | Roller diameter |
| C | 7 mm | Roller width |
| B | 8.1 mm | Overall width |
| B1 | 1.1 mm | Width mounting surface to outer ring end face |
| d1 | 6.8 mm | Shoulder diameter inner ring |
| g | M4 | Thread size |
| Cr | 1650 N | Dynamic load rating |
| C0r | 800 N | Load capacity radial |
| ≈m | 10 g | Weight |
| 52100 | 100Cr6 | GCr15 | Ring and ball material | |
| Nylon 66 | Retainer material | |
| Seals | Sealing solution | |
| Kyodo Yushi Multemp SRL | Grease | |
| -20°C to +120°C | Temperature range °C | |
| -4°F to +248°F | Temperature range °F |
| P6 (ABEC-3) | Tolerance | |
| P5 (ABEC-5) | Radial run-out | |
| 0.006-0.012 | Radial clearance |
| N | Allen Key 3 | Flat Key (+0.15/-0mm) |
| M | 4.6 | Width running suface center to mounting surface |
| DIN912 8.8 | Screw standard | |
| M4 | Screw size | |
| NM | 3 | Torgue |
| 18 | For rail size | |
| MRG | TMG | For rail type | |
| MRG18 | For rails | |
| RPG18 | RPGS18 | RAG18 | RAGS18 | For sliders |
| ROLLON | T-RACE |
| RNPG18 | RCP18G |
Bearing tolerances and clearances
