Bearing tolerances and clearances
- Tolerances: Normal, P6, P5
- Internal clearance: Single row track rollers, Double row track rollers
Precision floating roller REP28X, V profiled OD, eccentric, two seals on both side, stainless steel
| Eccentric | Adjustability | |
| floating | Roller version |
| D | 20 mm | Roller diameter |
| C | 9 mm | Roller width |
| B | 10.75 mm | Overall width |
| B1 | 1.75 mm | Width mounting surface to outer ring end face |
| d1 | 10.8 mm | Shoulder diameter inner ring |
| g | M5 | Thread size |
| Cr | 3000 N | Dynamic load rating |
| C0r | 1600 N | Load capacity radial |
| ≈m | 20 g | Weight |
| 440C | X105CrMo17 | 1.4125 | Ring and ball material | |
| Nylon 66 | Retainer material | |
| Seals | Sealing solution | |
| Kyodo Yushi Multemp SRL | Grease | |
| -20°C to +120°C | Temperature range °C | |
| -4°F to +248°F | Temperature range °F |
| P6 (ABEC-3) | Tolerance | |
| P5 (ABEC-5) | Radial run-out | |
| 0.006-0.012 | Radial clearance |
| N | Allen Key 4 | Flat Key (+0.15/-0mm) |
| M | 6.25 | Width running suface center to mounting surface |
| DIN912 8.8 | Screw standard | |
| M5 | Screw size | |
| NM | 7 | Torgue |
| 28 | For rail size | |
| MR | For rail type | |
| MR28 | For rails | |
| RP28 | RPS28 | RPT28 | RA28 | RAS28 | RAT28 | For sliders |
| T-RACE |
| REP28X REPX28 |
Bearing tolerances and clearances
