Cam follower (stud-type track roller), with axial guidance, with cage, with axial plain washer, with eccentric collar, crowned OD, screwdriver slot, CFE18UUR;FCJSE-40R;MCFRE-40-S
| D | 40 mm | Outside diameter |
| d | 18 mm | Stud diameter |
| B | 58 mm | Overall width |
| C | 20 mm | Outer ring width |
| B1 | 36.5 mm | Length shank on stud |
| B2 | 8 mm | Distance lubrication hole to flange ring |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 31.5 mm | Outside diameter flange ring |
| G | M18 x 1.5 | Thread stud |
| G1 | 19 mm | Thread length |
| M | 6 mm | Seat diameter for lubrication accessories |
| M1 | 3 mm | Diameter of lubrication hole (shank) |
| SW | 8 mm | Width across flats |
| de | 22 mm | Eccentric collar outside diameter |
| B1 | 16 mm | Eccentric collar width |
| e | 1 mm | Eccentricity |
| r min | 1 mm | Chamfer dimension outer ring |
| C | 14.2 kN | Basic dynamic load rating |
| C0 | 20.4 kN | Basic static load rating |
| Pu | 1.85 kN | Fatigue load limit |
| Fr | 10.9 kN | Maximum dynamic radial load |
| F0r | 15.5 kN | Maximum static radial load |
| nD G | 2900 r/min | Limiting speed |
| ≈m | 0.255 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric stud with eccentric collar | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| 52100 | 100Cr6 | Axial guidance | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| NIP A2x7.5 | Grease fitting | |
| M18 x 1.5 | Hexagonal nut | |
| 87 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| IKO | NSK | McGill | Smith |
| CFE18UUR | FCJSE-40R | MCFRE-40-S | MCR-40-SE |
