Cam follower (stud-type track roller), with axial guidance, full complement roller, with axial plain washer, crowned OD, screwdriver slot, CF12VUUR;KRV30LL/3AS;MCF-30-S
D | 30 mm | Outside diameter |
d | 12 mm | Stud diameter |
B | 40 mm | Overall width |
C | 14 mm | Outer ring width |
B1 | 25 mm | Length shank on stud |
B2 | 6 mm | Distance lubrication hole to flange ring |
C1 | 0.6 mm | Distance face outer ring to face thrust washer |
d1 | 23 mm | Outside diameter flange ring |
G | M12 x 1.5 | Thread stud |
G1 | 13 mm | Thread length |
M | 4 mm | Seat diameter for lubrication accessories |
M1 | 3 mm | Diameter of lubrication hole (shank) |
SW | 6 mm | Width across flats |
r min | 0.6 mm | Chamfer dimension outer ring |
C | 12.2 kN | Basic dynamic load rating |
C0 | 19 kN | Basic static load rating |
Pu | 1.84 kN | Fatigue load limit |
Fr | 9.5 kN | Maximum dynamic radial load |
F0r | 14.6 kN | Maximum static radial load |
nD G | 2100 r/min | Limiting speed |
≈m | 0.091 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Axial plain washer | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
52100 | 100Cr6 | Axial guidance | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
NIP A1x4.5 | Grease fitting | |
M12 x 1.5 | Hexagonal nut | |
22 Nm | Recommended tightening torque |
-30ºC to + 80ºC | Temperature range °C | |
-22ºF to + 176ºF | Temperature range °F |
IKO | THK | NTN | NSK | KOYO | McGill | Smith | FAG |
CF12VUUR | CF12VUUR | KRV30LL/3AS | FCRS-30R | CM12UURM | MCF-30-S | MCV-30-S | KRV30.2RS |