Cam follower (stud-type track roller), with axial guidance, full complement roller, crowned OD, screwdriver slot, CF24-1VR;KRV72/3AS;MCF-72
D | 72 mm | Outside diameter |
d | 24 mm | Stud diameter |
B | 80 mm | Overall width |
C | 29 mm | Outer ring width |
B1 | 49.5 mm | Length shank on stud |
B2 | 11 mm | Distance lubrication hole to flange ring |
C1 | 0.8 mm | Distance face outer ring to face thrust washer |
d1 | 44 mm | Outside diameter flange ring |
G | M24 x 1.5 | Thread stud |
G1 | 25 mm | Thread length |
M | 8 mm | Seat diameter for lubrication accessories |
M1 | 4 mm | Diameter of lubrication hole (shank) |
SW | 14 mm | Width across flats |
r min | 1.1 mm | Chamfer dimension outer ring |
C | 41.5 kN | Basic dynamic load rating |
C0 | 91 kN | Basic static load rating |
Pu | 11.1 kN | Fatigue load limit |
Fr | 37 kN | Maximum dynamic radial load |
F0r | 85 kN | Maximum static radial load |
nD G | 1100 r/min | Limiting speed |
≈m | 1.03 kg | Weight |
Crowned | Outer ring profile | |
Full complement roller | Roller guide | |
Centric | Stud type | |
Gap type | Sealing type | |
52100 | 100Cr6 | Outer ring material | |
52100 | 100Cr6 | Roller material | |
20CrMo (ASTM4118, SCM420) | Stud material | |
52100 | 100Cr6 | Axial guidance | |
Lithium Soap Grease NLGI #2 | Grease |
Screwdriver slot | Mouting hole | |
NIP A3x9.5 | Grease fitting | |
M24 x 1.5 | Hexagonal nut | |
220 Nm | Recommended tightening torque |
-30ºC to + 120ºC | Temperature range °C | |
-22ºF to + 250ºF | Temperature range °F |
IKO | THK | NTN | NSK | KOYO | McGill | Smith |
CF24-1VR | CF24-1VR | KRV72/3AS | FCR-72R | CM24-1RM | MCF-72 | MCV-72 |