Cam follower (stud-type track roller), with axial guidance, full complement roller, crowned OD, screwdriver slot, CF30-2VR;KRV90/3AS;MCF-90
| D | 90 mm | Outside diameter |
| d | 30 mm | Stud diameter |
| B | 100 mm | Overall width |
| C | 35 mm | Outer ring width |
| B1 | 63 mm | Length shank on stud |
| B2 | 15 mm | Distance lubrication hole to flange ring |
| C1 | 1 mm | Distance face outer ring to face thrust washer |
| d1 | 53 mm | Outside diameter flange ring |
| G | M30 x 1.5 | Thread stud |
| G1 | 32 mm | Thread length |
| M | 8 mm | Seat diameter for lubrication accessories |
| M1 | 4 mm | Diameter of lubrication hole (shank) |
| SW | 14 mm | Width across flats |
| r min | 1.1 mm | Chamfer dimension outer ring |
| C | 60 kN | Basic dynamic load rating |
| C0 | 142 kN | Basic static load rating |
| Pu | 16.9 kN | Fatigue load limit |
| Fr | 53 kN | Maximum dynamic radial load |
| F0r | 130 kN | Maximum static radial load |
| nD G | 850 r/min | Limiting speed |
| ≈m | 2.03 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric | Stud type | |
| Gap type | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| 52100 | 100Cr6 | Axial guidance | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| NIP A3x9.5 | Grease fitting | |
| M30 x 1.5 | Hexagonal nut | |
| 450 Nm | Recommended tightening torque |
| -30ºC to + 120ºC | Temperature range °C | |
| -22ºF to + 250ºF | Temperature range °F |
| IKO | THK | NTN | NSK | KOYO | McGill | Smith |
| CF30-2VR | CF30-2VR | KRV90/3AS | FCR-90R | CM30-2RM | MCF-90 | MCV-90 |
