Cam follower (stud-type track roller), with axial guidance, full complement roller, with axial plain washer, with eccentric collar, crowned OD, screwdriver slot, CFE12VUUR;FCRSE-30R;MCFE-30-S
| D | 30 mm | Outside diameter |
| d | 12 mm | Stud diameter |
| B | 40 mm | Overall width |
| C | 14 mm | Outer ring width |
| B1 | 25 mm | Length shank on stud |
| B2 | 6 mm | Distance lubrication hole to flange ring |
| C1 | 0.6 mm | Distance face outer ring to face thrust washer |
| d1 | 23 mm | Outside diameter flange ring |
| G | M12 x 1.5 | Thread stud |
| G1 | 13 mm | Thread length |
| M | 4 mm | Seat diameter for lubrication accessories |
| M1 | 3 mm | Diameter of lubrication hole (shank) |
| SW | 6 mm | Width across flats |
| de | 15 mm | Eccentric collar outside diameter |
| B1 | 11 mm | Eccentric collar width |
| e | 0.5 mm | Eccentricity |
| r min | 0.6 mm | Chamfer dimension outer ring |
| C | 12.2 kN | Basic dynamic load rating |
| C0 | 19 kN | Basic static load rating |
| Pu | 1.84 kN | Fatigue load limit |
| Fr | 9.5 kN | Maximum dynamic radial load |
| F0r | 14.6 kN | Maximum static radial load |
| nD G | 2100 r/min | Limiting speed |
| ≈m | 0.091 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric stud with eccentric collar | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| 52100 | 100Cr6 | Axial guidance | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| NIP A1x4.5 | Grease fitting | |
| M12 x 1.5 | Hexagonal nut | |
| 22 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| IKO | NSK | McGill | Smith |
| CFE12VUUR | FCRSE-30R | MCFE-30-S | MCV-30-SE |
