Bearing tolerances and clearances
- Tolerances: Normal, P6, P5
- Internal clearance: Single row track rollers, Double row track rollers
gothic arch groove profiled track rollers LFR50/5-6-2Z, LFR50/5-6 KDD, double row, shields on both side
| dS | 6 mm | Linear shaft diameter |
| d | 5 mm | Bore diameter |
| D | 17 mm | Outside diameter |
| B | 8 mm | Inner ring width |
| C | 7 mm | Outer ring width |
| AT | 10.5 mm | Linear shaft center to bore center |
| Da | 15.8 mm | Rolling contact diameter |
| rmin | 0.2 mm | Chamfer dimension |
| Cr | 1630 N | Effective dynamic load rating as track roller (radial) |
| C0r | 900 N | Effective static load rating as track roller (radial) |
| Pu | 44.5 N | Fatigue limit load |
| Fr | 2230 N | Maximum dynamic load rating as track roller (radial) |
| F0r | 1800 N | Maximum static load rating as track roller (radial) |
| ≈m | 0.01 kg | Weight |
| 52100 | 100Cr6 | GCr15 | Ring and ball material | |
| Nylon 66 | Retainer material | |
| Shields | Sealing solution | |
| Kyodo Yushi Multemp SRL | Grease | |
| -30ºC to +120ºC | Temperature range °C | |
| -22ºF to +250ºF | Temperature range °F | |
| N/A | Re-lubrication |
| P6 (ABEC-3) | Dimension tolerance | |
| P5 (ABEC-5) | Radial run-out | |
| Normal | Internal radial clearance |
| LFZ5 | Concentric bolt | |
| LFE5-1 | Eccentric bolt |
| Compliant | RoHS | |
| Compliant | REACH |
| INA | NIKO | NADELLA | JESA |
| LFR50/5-6 KDD LFR50/5-6-2Z LFR 50/5 KDD LFR50/5-6-2Z-HLC | LFR50/5-6 2Z | GLA17.06 | LRG 5-17-6 2RZ |
Bearing tolerances and clearances
