WELCOME TO C&H BEARING WEBSITE! C&H BEARING C&H
EN
0086-21-58356710
jason@chenghuibearing.com
PRODUCTS
INDUSTRIES
TECHNIQUE
ABOUT
CONTACT
T-Shaped Ring and Segment

Ring slides & curved segments are manufactured of high carbon chrome steel AISI52100, zone hardened on the T-shaped working surface for high wear resistance,  precision ground all over with datum register faces provided both internally and externally for ease of location.

Curved segments are cut from stock rings. They are matched in essential respects with their corresponding track system straight slides and ground square on the ends to a specified dimension relative to their true shape. An additional fixing hole is provided adjacent to the keyway each end to give extra support at the join position for all segments. Segments to any number of degrees can be supplied to cater for all track system configurations.

Note:

1.90°/180° segments are cut from full 360° rings, the cutting allowance is -0.2mm.
2.Standard ring segments will be slightly less than 90° and 180° because of the cutting allowance. Full 90° and 180°segments can be supplied to customer’s special order.   
3.Custom product is available.

PRODUCT FILTERS AND TABLE

Slide Size
23
Hole Centres
200
255
300
351
400
468
500
600
800
1000
Radius
90°
180°
360°
Designation

Interchange code

RESET ALL
FILTERS
Toggle ： Metric Imperial   Sort By :
Designation Hole Centres Radius Register face Register face Slide Height Holes within ±0.2 of true position Holes within ±0.2 of true position
B ±0.2 R° A C H X° Y°
CGT23-200-R90 200 90° 223 177 24 22.5° 11.25°
CGT23-200-R180 200 180° 223 177 24 22.5° 11.25°
CGT23-200-R360 200 360° 223 177 24 22.5° 11.25°
CGT23-255-R90 255 90° 278 232 24 22.5° 11.25°
CGT23-255-R180 255 180° 278 232 24 22.5° 11.25°
CGT23-255-R360 255 360° 278 232 24 22.5° 11.25°
CGT23-300-R180 300 180° 323 277 24 22.5° 11.25°
CGT23-300-R360 300 360° 323 277 24 22.5° 11.25°
CGT23-300-R90 300 90° 323 277 24 22.5° 11.25°
CGT23-351-R90 351 90° 374 328 24 22.5° 11.25°
CGT23-351-R180 351 180° 374 328 24 22.5° 11.25°
CGT23-351-R360 351 360° 374 328 24 22.5° 11.25°
CGT23-400-R90 400 90° 423 377 24 22.5° 11.25°
CGT23-400-R180 400 180° 423 377 24 22.5° 11.25°
CGT23-400-R360 400 360° 423 377 24 22.5° 11.25°
CGT23-468-R90 468 90° 491 445 24 22.5° 11.25°
CGT23-468-R180 468 180° 491 445 24 22.5° 11.25°
CGT23-468-R360 468 360° 491 445 24 22.5° 11.25°
CGT23-500-R90 500 90° 523 477 24 22.5° 11.25°
CGT23-500-R180 500 180° 523 477 24 22.5° 11.25°
CGT23-500-R360 500 360° 523 477 24 22.5° 11.25°
CGT23-600-R90 600 90° 623 577 24 22.5° 11.25°
CGT23-600-R180 600 180° 623 577 24 22.5° 11.25°
CGT23-600-R360 600 360° 623 577 24 22.5° 11.25°
CGT23-800-R90 800 90° 823 777 24 22.5° 11.25°
CGT23-800-R180 800 180° 823 777 24 22.5° 11.25°
CGT23-800-R360 800 360° 823 777 24 22.5° 11.25°
CGT23-1000-R90 1000 90° 1023 977 24 22.5° 11.25°
CGT23-1000-R180 1000 180° 1023 977 24 22.5° 11.25°
CGT23-1000-R360 1000 360° 1023 977 24 22.5° 11.25°
CGT23-200-R90
B ±0.2 Hole Centres 200
R° Radius 90°
A Register face 223
C Register face 177
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-200-R180
B ±0.2 Hole Centres 200
R° Radius 180°
A Register face 223
C Register face 177
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-200-R360
B ±0.2 Hole Centres 200
R° Radius 360°
A Register face 223
C Register face 177
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-255-R90
B ±0.2 Hole Centres 255
R° Radius 90°
A Register face 278
C Register face 232
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-255-R180
B ±0.2 Hole Centres 255
R° Radius 180°
A Register face 278
C Register face 232
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-255-R360
B ±0.2 Hole Centres 255
R° Radius 360°
A Register face 278
C Register face 232
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-300-R180
B ±0.2 Hole Centres 300
R° Radius 180°
A Register face 323
C Register face 277
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-300-R360
B ±0.2 Hole Centres 300
R° Radius 360°
A Register face 323
C Register face 277
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-300-R90
B ±0.2 Hole Centres 300
R° Radius 90°
A Register face 323
C Register face 277
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-351-R90
B ±0.2 Hole Centres 351
R° Radius 90°
A Register face 374
C Register face 328
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-351-R180
B ±0.2 Hole Centres 351
R° Radius 180°
A Register face 374
C Register face 328
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-351-R360
B ±0.2 Hole Centres 351
R° Radius 360°
A Register face 374
C Register face 328
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-400-R90
B ±0.2 Hole Centres 400
R° Radius 90°
A Register face 423
C Register face 377
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-400-R180
B ±0.2 Hole Centres 400
R° Radius 180°
A Register face 423
C Register face 377
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-400-R360
B ±0.2 Hole Centres 400
R° Radius 360°
A Register face 423
C Register face 377
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-468-R90
B ±0.2 Hole Centres 468
R° Radius 90°
A Register face 491
C Register face 445
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-468-R180
B ±0.2 Hole Centres 468
R° Radius 180°
A Register face 491
C Register face 445
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-468-R360
B ±0.2 Hole Centres 468
R° Radius 360°
A Register face 491
C Register face 445
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-500-R90
B ±0.2 Hole Centres 500
R° Radius 90°
A Register face 523
C Register face 477
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-500-R180
B ±0.2 Hole Centres 500
R° Radius 180°
A Register face 523
C Register face 477
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-500-R360
B ±0.2 Hole Centres 500
R° Radius 360°
A Register face 523
C Register face 477
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-600-R90
B ±0.2 Hole Centres 600
R° Radius 90°
A Register face 623
C Register face 577
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-600-R180
B ±0.2 Hole Centres 600
R° Radius 180°
A Register face 623
C Register face 577
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-600-R360
B ±0.2 Hole Centres 600
R° Radius 360°
A Register face 623
C Register face 577
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-800-R90
B ±0.2 Hole Centres 800
R° Radius 90°
A Register face 823
C Register face 777
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-800-R180
B ±0.2 Hole Centres 800
R° Radius 180°
A Register face 823
C Register face 777
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-800-R360
B ±0.2 Hole Centres 800
R° Radius 360°
A Register face 823
C Register face 777
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-1000-R90
B ±0.2 Hole Centres 1000
R° Radius 90°
A Register face 1023
C Register face 977
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-1000-R180
B ±0.2 Hole Centres 1000
R° Radius 180°
A Register face 1023
C Register face 977
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
CGT23-1000-R360
B ±0.2 Hole Centres 1000
R° Radius 360°
A Register face 1023
C Register face 977
H Slide Height 24
X° Holes within ±0.2 of true position 22.5°
Y° Holes within ±0.2 of true position 11.25°
Hole Centres
B ±0.2
200
Radius
R°
90°
Register face
A
223
Register face
C
177
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
200
Radius
R°
180°
Register face
A
223
Register face
C
177
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
200
Radius
R°
360°
Register face
A
223
Register face
C
177
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
255
Radius
R°
90°
Register face
A
278
Register face
C
232
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
255
Radius
R°
180°
Register face
A
278
Register face
C
232
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
255
Radius
R°
360°
Register face
A
278
Register face
C
232
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
300
Radius
R°
180°
Register face
A
323
Register face
C
277
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
300
Radius
R°
360°
Register face
A
323
Register face
C
277
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
300
Radius
R°
90°
Register face
A
323
Register face
C
277
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
351
Radius
R°
90°
Register face
A
374
Register face
C
328
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
351
Radius
R°
180°
Register face
A
374
Register face
C
328
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
351
Radius
R°
360°
Register face
A
374
Register face
C
328
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
400
Radius
R°
90°
Register face
A
423
Register face
C
377
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
400
Radius
R°
180°
Register face
A
423
Register face
C
377
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
400
Radius
R°
360°
Register face
A
423
Register face
C
377
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
468
Radius
R°
90°
Register face
A
491
Register face
C
445
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
468
Radius
R°
180°
Register face
A
491
Register face
C
445
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
468
Radius
R°
360°
Register face
A
491
Register face
C
445
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
500
Radius
R°
90°
Register face
A
523
Register face
C
477
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
500
Radius
R°
180°
Register face
A
523
Register face
C
477
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
500
Radius
R°
360°
Register face
A
523
Register face
C
477
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
600
Radius
R°
90°
Register face
A
623
Register face
C
577
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
600
Radius
R°
180°
Register face
A
623
Register face
C
577
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
600
Radius
R°
360°
Register face
A
623
Register face
C
577
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
800
Radius
R°
90°
Register face
A
823
Register face
C
777
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
800
Radius
R°
180°
Register face
A
823
Register face
C
777
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
800
Radius
R°
360°
Register face
A
823
Register face
C
777
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
1000
Radius
R°
90°
Register face
A
1023
Register face
C
977
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
1000
Radius
R°
180°
Register face
A
1023
Register face
C
977
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
Hole Centres
B ±0.2
1000
Radius
R°
360°
Register face
A
1023
Register face
C
977
Slide Height
H
24
Holes within ±0.2 of true position
X°
22.5°
Holes within ±0.2 of true position
Y°
11.25°
111

ISO CERTIFICATE
ABOUT US
CONTACT US
SOCIAL MEDIAS
MOBILE APPS
©Copyright 2022 C&H Bearing, All Rights Reserved Terms of use Privacy Policy SITEMAP
C&H BEARING WEBSITE