Контурный кулисный подшипник дюймового размера (подшипник с цапфой типа стержня), тяжелый стержень, корончатая наружная поверхность, гнездо шестигранное, герметичный, CCFH-2 1/4-SB, CH-72-LW
| D | 57.15 mm | Outside diameter |
| d | 28.575 mm | Stud diameter |
| B | 83.3 mm | Overall width |
| C | 31.75 mm | Outer ring width |
| B1 | 50.8 mm | Length shank on stud |
| B2 | 12.7 mm | Distance lubrication hole to flange ring |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 35.72 mm | Outside diameter flange ring |
| G | 1 1/8-12 | Thread stud |
| G1 | 25.4 mm | Thread length |
| M | 4.7625 mm | Seat diameter for lubrication accessories |
| M1 | 3.175 mm | Diameter of lubrication hole (shank) |
| SW | 11.1125 mm | Width across flats |
| Fr | 35984 kN | Maximum dynamic radial load |
| F0r | 94031 kN | Maximum static radial load |
| nD G | 1300 r/min | Limiting speed |
| ≈m | 0.85 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Heavy duty,Centric | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Hex | Mouting hole | |
| 3/16” Alemite Fitting | Grease fitting | |
| 169.5 Nm | Recommended tightening torque |
| -30ºC to + 80ºC | Temperature range °C | |
| -22ºF to + 176ºF | Temperature range °F |
| Mc.GILL | RBC | IKO | SMITH | Carter |
| CCFH-2 1/4-SB | CH-72-LW | CRH 36 VBUUR | HR-2 1/4-XBC | CCNBH-72-SB |
