Кулачковый подшипник (роликовый ролик с штудером), с осевым управлением, полнозагруженный ролик, цилиндрическая внешняя поверхность, шлиц для отвертки, CF16V; KRV35X/3AS; MCF-35-X
| D | 35 mm | Outside diameter |
| d | 16 mm | Stud diameter |
| B | 52 mm | Overall width |
| C | 18 mm | Outer ring width |
| B1 | 32.5 mm | Length shank on stud |
| B2 | 8 mm | Distance lubrication hole to flange ring |
| C1 | 0.8 mm | Distance face outer ring to face thrust washer |
| d1 | 27.6 mm | Outside diameter flange ring |
| G | M16 x 1.5 | Thread stud |
| G1 | 17 mm | Thread length |
| M | 4 mm | Seat diameter for lubrication accessories |
| M1 | 3 mm | Diameter of lubrication hole (shank) |
| SW | 8 mm | Width across flats |
| r min | 0.8 mm | Chamfer dimension outer ring |
| C | 18.3 kN | Basic dynamic load rating |
| C0 | 35 kN | Basic static load rating |
| Pu | 2.9 kN | Fatigue load limit |
| Fr | 12.8 kN | Maximum dynamic radial load |
| F0r | 23 kN | Maximum static radial load |
| nD G | 1600 r/min | Limiting speed |
| ≈m | 0.173 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric | Stud type | |
| Axial plain washer | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| 52100 | 100Cr6 | Axial guidance | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| NIP A2x7.5 | Grease fitting | |
| M16 x 1.5 | Hexagonal nut | |
| 58 Nm | Recommended tightening torque |
| -30ºC to + 120ºC | Temperature range °C | |
| -22ºF to + 250ºF | Temperature range °F |
| IKO | THK | NTN | NSK | KOYO | McGill | Smith |
| CF16V | CF16V | KRV35X/3AS | FCR-35 | CM16M | MCF-35-X | MCV-35-C |
